Even though wildfires are a part of the natural process of creation and destruction in the environment, the bad thing for people is that sometimes their homes are located directly in the path. A large number of people have to worry every year whether a wildfire will affect their area, but if you own your home and you know what to do, there are things that can protect your home from them. Depending on the circumstances and where your home is located, it may not be enough, but it certainly cannot hurt to try and you may actually end up saving your home.
Using fire-resistant materials on the exterior of your house is essential. The roofing material is the most important, since this has the largest amount of surface area and sparks of fire called firebrands will be picked up by the wind and possibly carried over your house. Having the fire-resistant roofing material such as metal, fiberglass, or tile will slow down the spread of the fire from the roof and it may not even catch on fire at all from one of these small sparks. You do not want to use oil-based roofing materials on a home that is located in a place at risk of wildfires.
Fire-resistant materials on the outer walls of your home will also slow down the spread of the fire, such as stone, metal, or brick, so if you are considering having a home built for you, these are materials you really want to consider. You should also have smaller windows on the exterior of your home, since large windows are more likely to break and allow the hot air and fire sparks from the outside of the house inside, where it will catch curtains and everything else. If you have to have large windows, have multi-pane ones instead of single-pane.
If there is a wildfire close to where you live, wet down the exterior of the house, especially your roof. This will give a little extra protection against firebrands floating by on the wind. Wetting down the yard and vegetation will also help, but you should do this just before you decide to leave the house.
Get rid of any dead vegetation in the yard and do not allow things like dead leaves to build up, since these are easy targets. If you do have a pile of leaves in your yard, the best thing that you can do before you evacuate is soak them down with water.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Thursday, October 18, 2007
Bathroom Humidity and Mold Problems
A relaxing bath or shower can be just what you need after a long day at work, but when you look up and around you and you see mold starting to grow on the walls, the relaxation usually gets ruined by the worry about that mold problem. It shows itself as a splotchy growth on the drywall and it usually moves slowly from one end of the room to the other. If left untreated, it will eventually cover the rest of your bathroom and then you really will not have much of a good time bathing.
Most of the time drywall that becomes contaminated needs to be taken out and thrown away, unless the growth is very new and superficial. If it is old growth and is found to be embedded into the wall, then the drywall cannot be cleaned, since it is such a porous surface. This is unfortunate, because tearing out drywall and replacing it can cost quite a bit, especially if you have to hire someone else to do it for you.
A lot of people seem to like installing carpet in their bathrooms, but what they may not realize is just what a very bad idea this is. Water and mold go hand in hand and once carpet gets wet and is allowed to stay that way on a continuing basis as it will be in a bathroom, it eventually begins to mold. When carpet gets moldy, the unfortunate fact about this, as with drywall, is that it usually has to be thrown out. Carpet can be cleaned, but the padding underneath it cannot and if mold continues to grow on the padding, any new carpet that you put over it will also be contaminated and so will the old carpet if you attempted to clean it.
Try to keep the humidity in the bathroom down by installing an exhaust vent to let steam and moisture out of the house. Also keep wet items of clothing and towels washed as often as possible and avoid letting them stay on the floor, especially a carpeted one.
Keep an eye on your toilet and make sure that it is flushing properly and that the members of your house are not putting too much toilet paper in it. Feminine napkins can sometimes be put into toilets, but this is usually only recommended for homes that are connected to city sewer systems. Homes with septic tanks tend to have a harder time with feminine napkins being put in the toilet and can stop up the whole system, particularly if the pipes are old and corroded.
Jim Corkern is a writer and promoter of
Emergency Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Most of the time drywall that becomes contaminated needs to be taken out and thrown away, unless the growth is very new and superficial. If it is old growth and is found to be embedded into the wall, then the drywall cannot be cleaned, since it is such a porous surface. This is unfortunate, because tearing out drywall and replacing it can cost quite a bit, especially if you have to hire someone else to do it for you.
A lot of people seem to like installing carpet in their bathrooms, but what they may not realize is just what a very bad idea this is. Water and mold go hand in hand and once carpet gets wet and is allowed to stay that way on a continuing basis as it will be in a bathroom, it eventually begins to mold. When carpet gets moldy, the unfortunate fact about this, as with drywall, is that it usually has to be thrown out. Carpet can be cleaned, but the padding underneath it cannot and if mold continues to grow on the padding, any new carpet that you put over it will also be contaminated and so will the old carpet if you attempted to clean it.
Try to keep the humidity in the bathroom down by installing an exhaust vent to let steam and moisture out of the house. Also keep wet items of clothing and towels washed as often as possible and avoid letting them stay on the floor, especially a carpeted one.
Keep an eye on your toilet and make sure that it is flushing properly and that the members of your house are not putting too much toilet paper in it. Feminine napkins can sometimes be put into toilets, but this is usually only recommended for homes that are connected to city sewer systems. Homes with septic tanks tend to have a harder time with feminine napkins being put in the toilet and can stop up the whole system, particularly if the pipes are old and corroded.
Jim Corkern is a writer and promoter of
Emergency Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Draining Water From Your Yard
Standing water in the yard is a very unattractive feature of a person’s property not only due to its aesthetically displeasing characteristic, but also because of the potential water damage that it can cause to the property if there is enough of it in the right area. The owner’s first instinct to fix this problem is to try and plant things in the area where the water tends to build up, but this will not typically work. Any plants that are put in an area that floods from time to time will drown and die. Getting rid of the standing water on your property is not too difficult most of the time, since the problem usually lies simply with the elevation of the part of the yard that is affected the most.
If it is a problem with the elevation of the flooded area, then all you really need to do is add soil to that area and make it level with the rest of your yard. This will keep the flooding at bay as long as the water builds up as a result of heavy rain. Plant some grass over it both to hide the soil and to keep it in place.
Installing a drainage system is also an option, but you need to contact your local building commission and be certain that you will be allowed to build a drainage system. Building permits can be tricky and you need to make sure that your building project is on the up and up before you start working on anything.
Digging a French drain is not very difficult to do. Dig a little ditch in your yard and lay a piece of PVC pipe down inside it. Cover it up with gravel and this will direct the water anywhere you want it to, like a city sewer or ditch. When you dig it, you need to be sure that the highest point of the pipe is in the area that you want to drain and that the lowest point is where you want the water to drain to. You need to make the pipe slant downhill 6 inches for every 100 feet. To keep soil from getting in the pipe, you should install a strainer over the end. A simple sink strainer capped over the end could work for this or a piece of wire mesh. A strainer at the lower end is not needed.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
If it is a problem with the elevation of the flooded area, then all you really need to do is add soil to that area and make it level with the rest of your yard. This will keep the flooding at bay as long as the water builds up as a result of heavy rain. Plant some grass over it both to hide the soil and to keep it in place.
Installing a drainage system is also an option, but you need to contact your local building commission and be certain that you will be allowed to build a drainage system. Building permits can be tricky and you need to make sure that your building project is on the up and up before you start working on anything.
Digging a French drain is not very difficult to do. Dig a little ditch in your yard and lay a piece of PVC pipe down inside it. Cover it up with gravel and this will direct the water anywhere you want it to, like a city sewer or ditch. When you dig it, you need to be sure that the highest point of the pipe is in the area that you want to drain and that the lowest point is where you want the water to drain to. You need to make the pipe slant downhill 6 inches for every 100 feet. To keep soil from getting in the pipe, you should install a strainer over the end. A simple sink strainer capped over the end could work for this or a piece of wire mesh. A strainer at the lower end is not needed.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
How to Sanitize Your Water
“Water, water everywhere and not a drop to drink” is a saying that most of us are familiar with and unfortunately for those of us who live in hurricane and tropical storm prone areas, there may be some real truth to it. The amount of water that is clean and sanitary to drink during these storms is very limited if you do not have enough water saved up in advance.
You need to keep plenty of clean bottled water on hand during hurricane season and doing this is not very difficult. Save milk jugs and store tap water in them. Try to keep them in an area of your home that is high up, so you are sure that flood waters will not contaminate them. Keep around at least one gallon of water for each person staying with you during the storm for every day you expect the storm to last and then some. Running out of clean water is not something you want to do.
Boiling tap water is an option if you have electricity. If not, a small gas powered generator can do the trick if you are without power for a significant period and can really be a life saver. Filter the water first through a cloth to get any sediment that may have gotten into the local water supply out before you let it set for a while. Put the clear water into a pot and boil for about ten minutes or so. This should give you clean water to drink or bathe in. You should never drink water from your faucet during a hurricane or flood, because of the risk of the local water supply being contaminated with sea water or sewage. Flood water or sea water also cannot be boiled to the point of being safe to drink, since it may be contaminated with more biohazards and chemicals than boiling can get rid of.
A couple of drops of bleach in a gallon of water can also sanitize it, but you should not use scented bleach for this. Allow the water to set for about 30 minutes or longer before drinking it. Do not be alarmed about this idea, since bleach has been used in water supplies for years to sanitize the water that we drink.
Water purification tablets are also available for purchase at most outdoor or camping supply stores. These can be used in the place of heat or bleach in sanitizing water.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
You need to keep plenty of clean bottled water on hand during hurricane season and doing this is not very difficult. Save milk jugs and store tap water in them. Try to keep them in an area of your home that is high up, so you are sure that flood waters will not contaminate them. Keep around at least one gallon of water for each person staying with you during the storm for every day you expect the storm to last and then some. Running out of clean water is not something you want to do.
Boiling tap water is an option if you have electricity. If not, a small gas powered generator can do the trick if you are without power for a significant period and can really be a life saver. Filter the water first through a cloth to get any sediment that may have gotten into the local water supply out before you let it set for a while. Put the clear water into a pot and boil for about ten minutes or so. This should give you clean water to drink or bathe in. You should never drink water from your faucet during a hurricane or flood, because of the risk of the local water supply being contaminated with sea water or sewage. Flood water or sea water also cannot be boiled to the point of being safe to drink, since it may be contaminated with more biohazards and chemicals than boiling can get rid of.
A couple of drops of bleach in a gallon of water can also sanitize it, but you should not use scented bleach for this. Allow the water to set for about 30 minutes or longer before drinking it. Do not be alarmed about this idea, since bleach has been used in water supplies for years to sanitize the water that we drink.
Water purification tablets are also available for purchase at most outdoor or camping supply stores. These can be used in the place of heat or bleach in sanitizing water.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Mold Allergy Issues
Allergies plague millions of people the world over, whether the kind of allergy is related to food, pet dander, grasses, mold, or certain chemicals. The symptoms are usually the most prevalent during the spring, summer, and early fall and are caused by seasonal molds and plants. Molds simply lie dormant during the winter time and are unable to continue growing if they are exposed to freezing temperatures. Once spring comes back, mold spore levels in the outdoors skyrocket, wreaking havoc on those of us who happen to be allergic to certain varieties.
The allergy symptoms associated with mold are typically about the same as the allergy symptoms that are caused by almost anything else. Depending upon the severity of the allergy of the person affected, the symptoms can range from a simple runny nose all the way to a serious reaction requiring hospitalization. Children, the elderly, and anyone with a weakened immune system needs to be careful when it comes to just how much of their allergen that they come into contact with. Allergy symptoms related to mold can also seemingly be made worse by eating foods that have been processed containing mold. This can include cheeses made with mold like gorgonzola or blue cheese or just simple funguses like mushrooms. Beer and bread have also been known to worsen these reactions, since they are made with yeast, which is a fungus.
While the majority of molds in the world do not cause allergic reactions, there are a few genii that do. Most allergic reactions are caused by molds in Penicillium, Cladosporium, and Alternaria. Even though Penicillin is named after the genus Penicillium, there are molds in this genus that can cause allergic reactions just like the others.
Try to keep an eye on the mold spore reports that occur on your local news stations regularly, usually every morning, noon, and every evening. If you have children or elderly members of your family that are allergic to mold spores or have any other kind of allergy, you need to be careful about taking them out of the home during times of high spore or pollen counts. A mistake can be deadly if they are exposed to their allergen for a long period of time. If you have any doubts as to whether you should take them outside during these times, the best bet is to have them stay home.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
The allergy symptoms associated with mold are typically about the same as the allergy symptoms that are caused by almost anything else. Depending upon the severity of the allergy of the person affected, the symptoms can range from a simple runny nose all the way to a serious reaction requiring hospitalization. Children, the elderly, and anyone with a weakened immune system needs to be careful when it comes to just how much of their allergen that they come into contact with. Allergy symptoms related to mold can also seemingly be made worse by eating foods that have been processed containing mold. This can include cheeses made with mold like gorgonzola or blue cheese or just simple funguses like mushrooms. Beer and bread have also been known to worsen these reactions, since they are made with yeast, which is a fungus.
While the majority of molds in the world do not cause allergic reactions, there are a few genii that do. Most allergic reactions are caused by molds in Penicillium, Cladosporium, and Alternaria. Even though Penicillin is named after the genus Penicillium, there are molds in this genus that can cause allergic reactions just like the others.
Try to keep an eye on the mold spore reports that occur on your local news stations regularly, usually every morning, noon, and every evening. If you have children or elderly members of your family that are allergic to mold spores or have any other kind of allergy, you need to be careful about taking them out of the home during times of high spore or pollen counts. A mistake can be deadly if they are exposed to their allergen for a long period of time. If you have any doubts as to whether you should take them outside during these times, the best bet is to have them stay home.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
Subscribe to:
Posts (Atom)
